A hood the roof was never designed for
Smoke and heat need somewhere to go once a roof is overhead. We size the hood and route its duct through the roof framing while the structure is still on paper.
Built as one connected project
Cooking under a roof changes the engineering. A grill that is perfectly safe in open air pushes heat, smoke and grease into a ceiling once a roof goes over it, so the hood, the ceiling material and the clearances have to be designed together with the structure. The gas line has to be sized for every burner running at once, and the refrigerator, the ice maker, the lighting and the fans each want their own circuit. None of that shows up in a rendering, and all of it decides whether the kitchen works.
We start with the appliances. The grill, side burners, refrigeration, sink and hood are chosen first, because their cut-out sizes, gas demand and electrical loads set the cabinet layout, the countertop and the roof framing above. Then the kitchen is tied into the pavilion or lanai it lives under: the hood vents through a roof that is framed for it, the counters line up with the columns, and the lighting and fan plan covers the cook and the guests, not just the middle of the slab.
Who this is for
What we remove
Smoke and heat need somewhere to go once a roof is overhead. We size the hood and route its duct through the roof framing while the structure is still on paper.
A grill, a side burner and a fire feature can outrun an undersized line. We size the run for every appliance at full use and coordinate the meter or tank with the gas supplier.
Choosing the grill after the countertop is cut means grinding stone or living with gaps. Appliance cut-outs are fixed before cabinets and counters are drawn.
Every Outdoor Kitchens project runs through The Watermark Way™ — feasibility first, stamped engineering, frozen selections, a documented punch walk before handoff, and a shared project schedule, documents and photos in our client project system.
See our processCommon questions
Where we build it